On This Page

Configuring Ethernet Connectivity

Proper setup requires configuring the TCP/IP correctly and assigning a listen port. If needed, consult with your network administrator for help with configuring a terminal for your network.
To configure the Ethernet connection: 
  1. Press the green 
    O
    (Confirm) key and the
    1
     key at the same time. 
  2. When prompted, enter your password and press the green 
    O 
     (Confirm) key. The default password is 
    12345678
    . Change the default password after you complete the configuration of your internet connection.
  3. On the Engineering menu screen, tap 
    Comms Setup
    . 
  4. On the Comms Setup screen, tap 
    Comm Type
    . 
  5. On the Choose comm screen, tap 
    TCPIP/eth
    .
  6. On the Comms Setup screen, tap 
    TCP/IP Setup
    .
  7. On the TCP/IP Setup screen, tap 
    Server/Client Mode.
  8. On the TCP Mode screen, tap 
    TCP Server
    .
  9. On the TCP/IP Setup screen, tap 
    Listen Device
  10. On the Select Interface screen, tap 
    eth0
    .
  11. On the Comms Setup screen, tap 
    TCP/IP Setup
    . 
  12. On the TCP/IP Setup screen, tap 
    Listen Port.
  13. On the Listen Port screen, enter 
    16107
     and press the green 
    O
    (Confirm) key.
  14. Return to the Engineering menu screen by pressing the red 
    X
    (Cancel) key several times. If your Ethernet is correctly enabled, the 
    <…>
     icon appear in the top, left corner of the terminal screen.